Frieren: Beyond Journey's End
Frieren Magic Staff — Detachable PVC Wand (57.5")
$241.99
Free shipping over $100 · Pay in 4 with Shop Pay · Prices convert at checkout for UK, CA, AU
Detachable 57.5-inch PVC magic wand inspired by Frieren: Beyond Journey's End. Travel-friendly construction, cosplay-ready.
Ships fast from UK workshop
Free shipping over $150
12-month warranty
Highlights
US
7–14 business days
Canada
10–15 business days
UK
2–5 business days
Returns
30 days
Inspired by the original work. Unofficial collectible replica — not affiliated with any franchise owner. Decorative display piece, not battle-ready. 18+ only.
Free worldwide shipping
On orders over $150 — UK, US, Canada, EU, AU, NZ
30-day returns
Change of mind covered, no restocking fee
Secure checkout
Stripe + PayPal, never stores card data
12-month warranty
Craftsmanship-defect cover on every replica
The Lore
About Frieren's staff
Frieren's staff appears in nearly every frame of Frieren: Beyond Journey's End — an elven mage's travelling tool, used to cast offensive magic, defensive barriers, and mundane conveniences alike. The detachable 57.5-inch design lets cosplayers travel with it sealed inside a standard suitcase, then assemble it on-site. Accurate to the anime proportions and paint palette.
Specifications
- Total length
- 146 cm (57.5 in)
- Approx. weight
- 1.0 kg
- Primary material
- Pvc
- Edge / finish
- sculpted crown, painted finish
- Scale
- Life size
- Assembly
- Yes — splits into 3 sections for travel
- Made by
- Kojima Blades — workshop-finished in the UK
- Condition
- Brand new, hand-inspected before dispatch
- Box contents
- 1× staff (assembled or sectioned), protective tube, care card
- Dispatch
- 2–3 business days
- Ships from
- United Kingdom
- Warranty
- 12-month craftsmanship warranty
Overview
The full breakdown
Craftsmanship
How it's made
Travel-friendly PVC build
High-density PVC shaft, painted and clear-coated for durability. The piece is intentionally lightweight (under 1.2 kg typical) so convention wear and photo shoots are comfortable all day. Sections are threaded and key-locked so there is no wobble once assembled.
Surface finish
Multi-layer paint with a matte-to-satin gradient on the shaft and high-gloss accent on the crown — the same layering cosplay studios use for Daisho, WETA-grade props. The finish is resilient against minor handling marks; wipe with a soft microfiber to restore the sheen.
Quality control
Every piece is inspected at our UK workshop before dispatch: fit check, paint check, wrap-tension check, and a tap test on any threaded joints. If it fails any of the above, it doesn't ship. Our craftsmanship warranty covers you for 12 months against manufacturing defects.
Who this is for
Built for the serious fan
Cosplay
Convention-ready out of the box. If you're going as Frieren at frieren anime expos, comic cons, or LARP meets, the piece reads from 10 metres and holds up in photography.
Collector display
Built to be seen. Photogenic from every angle, anchors a frieren shelf or a game-room wall in a way printed figures and posters never can.
Gift
One of the highest-rated gifts we ship — specifically for the Frieren fan in your life who already owns the art book, the funko, and the soundtrack vinyl. Gift-wrap available at checkout.
Display
How to display this piece
Vertical corner stand
Our weighted vertical stand holds up to 220 cm. The piece stands 'up', like a spear rack.
Wall-diagonal mount
Two padded hooks holding the shaft diagonally — elegant on a feature wall or above a stairwell.
Ceiling-drop chains
For large pieces we recommend two 20 cm chains from the ceiling — the piece hangs horizontally, floats the room.
Care & Maintenance
Keep it looking workshop-fresh
Wipe with a soft, dry microfiber after handling to remove skin oils.
Store indoors, away from direct sunlight and humidity above 60% RH.
Do not expose to temperatures above 40 °C (104 °F) — direct sun on a car dashboard will warp PVC.
For painted surfaces, never use alcohol or acetone — they strip clear coat. Soft soap-and-water only.
If the painted finish gets scratched, touch-up kits are available on request — contact us with a photo.
Why us
Kojima Blades vs the usual suspects
Questions
Everything you need to know before you buy
No. This is a display-grade replica with a deliberately blunt edge. It is not battle-ready, not sharpenable to a usable edge, and is intended for display, cosplay, and photography only. Owners must be 18+.
Approximately 146 cm (57.5 in), weighing 1.0 kg. See the full spec table above for exact dimensions and material breakdown.
No — this piece uses high-density PVC, which is the industry standard for travel-friendly convention props. It's intentionally light (1.0 kg) so you can wear it all day without fatigue.
Wipe with a soft microfiber after handling. Soap-and-water only on painted surfaces — avoid alcohol or acetone. Full care guide is in the Care section on this page.
The stand is sold separately. We stock weighted floor stands, wall racks, and hanging hooks matched to each weapon type — see the Display options section for recommendations specific to staffs.
Dispatch is 2–3 business days from our UK workshop. Delivery is typically 7–15 business days to the US/Canada, 2–4 business days to the UK, and 10–20 business days to Australia and New Zealand. Full schedule on our Shipping page.
Yes — 30-day returns on all pieces, provided the item is in original condition and packaging. Full policy on our Returns page. Contact us first and we'll walk you through the return process and refund timing.
No. This is an unofficial tribute replica, inspired by the original work. We are independent makers and are not affiliated with, endorsed by, or licensed by the frieren franchise owner.
Lightweight and travel-ready. This piece is specifically designed to detach into sections for packing and shipping.On airline checked baggage, declare it at check-in; do not attempt to carry a replica weapon in cabin luggage.
Yes — checkout supports Shop Pay installments (4 interest-free payments), Klarna (UK/EU), and Afterpay (US/AU). Eligibility is shown at checkout.
Scale, finish, and structural integrity. Most sub-£100 replicas are hollow plastic shells with printed decals. Ours are high-density PVC over a reinforced core, with real paint layering, at the on-screen proportions, and they survive handling. See the Comparison section below for a head-to-head breakdown.
We don't have a physical showroom, but the gallery above includes every angle our workshop photographs, plus any 360° video where available. If there's a specific angle or detail you want to see, email us — we'll shoot it and send photos within 24 hours.
Verified reviews
What buyers are saying
Purchased for my fiancé as a Christmas gift and a prop to use in our engagement shoot! He was very happy with it and noted the high quality. :)
Arrived on time and looks super awesome. The person I gifted it to shrieked with how awesome the sword was . 10/10
Item arrived in perfect condition and on time, its as impressive as the images. My buddy absolutely adores it.
Ordered this for my husband who is a big fan and he absolutely loved it!
This sword is absolutely perfect. The attention to detail is insane and it arrived in a very timely fashion. Definitely recommend!!!
More from frieren
Build out your frieren collection
Other iconic staffs
Compare with other staff replicas
Frieren Magic Staff — Detachable PVC Wand (57.5")
$241.99